Save 21%

Rode Stereo VideoMic Pro Rycote


23,600.00 18,699.00

Save: 4,901.00 (20.8%)

Key Features
  • Ideal for Video & DSLR Cameras
  • Integrated Rycote Lyre Shockmount
  • Matched Pair, 1/2″ Condenser Capsules
  • XY Stereo Configuration

Only 2 left in stock

Code EAN: 698813004805 SKU: 1046 Category:


The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.

Broadcast-recording-quality on-camera microphone
Matched pair, 1/2″ condenser capsules in X/Y stereo configuration
Ultra-lightweight, compact form factor
Two-step high-pass filter (flat, 75 Hz)
Three-position level control (-10, 0, +20 dB)
9V-battery-powered – over 100 hours of use (alkaline)
Integrated Rycote Lyre shockmount
Denser foam windscreen
1/8″ (3.5mm) stereo mini-jack output
Billeted metal camera shoe mount with 3/8″ thread for easy boompole mounting

Additional information




TransducerPressure gradient
Polar PatternXY Cardioid
Frequency Range40 Hz to 20 kHz (selectable HPF @ 75 Hz)
Sensitivity-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
Output Impedance200 Ohms
Maximum Output+4.2 dBu (@ 1% THD into 1 kOhms)
Dynamic Range100 dB
Maximum SPL134 dB, max (1 kHz, 1% THD into 1 kOhms load)
Signal / Noise76 dBA (A-weighted per IED651)
Power Supply9 V alkaline battery
Connection1/8″ (3.5 mm) stereo mini-jack
Signal to Noise Ratio76 dBA SPL (A-weighted per IEC651)
Dimensions (D x W x H)4.5 x 3.1 x 5.3″ (115 x 80 x 134 mm)
Weight0.26 lb (116 g) (without battery)
Packaging Info
Package Weight0.57 lb
Box Dimensions (LxWxH)8.7 x 5.15 x 3.1″


There are no reviews yet.

Be the first to review “Rode Stereo VideoMic Pro Rycote”

Your email address will not be published. Required fields are marked *