Zhiyun-Tech Crane-2 3-Axis Stabilizer with Follow Focus


49,990.00 43,990.00

Out of stock

SKU: 13558 Category:


Gain greater control over your gimbal shots with the Zhiyun-Tech Crane-2, a 3-axis handheld stabilizer with an integrated follow focus control for select Canon cameras. The Crane-2 supports DSLRs, mirrorless cameras, and camcorders weighing up to a solid seven pounds. Connect your Canon DSLR or mirrorless camera (released after 2008, with an original autofocus lens) to the gimbal via cable, then adjust focus using the large thumbwheel on the handgrip. The Crane-2 offers three levels of focus control, enabling you to fine-tune your focusing based on the lens used, and the shot itself.

For quick, convenient adjusting of your camera’s settings, the Crane-2 provides an interface comparable to those found on most cameras. Two large buttons, and two smaller ones, on the handgrip are pressed or rotated to scroll through and choose parameters. An LED screen above the controls enables you to quickly and easily monitor your settings. The Crane-2 offers improved motor torque, response speed, and image stabilization over earlier Zhiyun models, enabling smooth, reliable moves.

Shoot up to a whopping maximum of 18 hours—the Crane-2’s three 18650-type batteries provide 6000mAh of capacity. Select Sony cameras may be charged through the gimbal, eliminating time otherwise spent swapping out camera batteries. Additional Crane-2 features include a Manfrotto-standard quick release plate for rapid camera mounting, and a “slow-fall” function that protects your camera from a sudden drop when the stabilizer is powered down.

  • Supports cameras weighing up to 7 pounds
  • Improved torque, response, and image stabilization over prior models
  • Quick, direct camera control via handgrip buttons
  • LED screen displays camera and stabilizer settings
  • Manfrotto-standard quick release plate for quick camera mounting
  • Maximum of 18-hour runtime with included batteries
  • “Slow-fall” feature protects your camera from a sudden drop when the Crane-2 is powered down
  • Power select Sony cameras through the stabilizer
Follow Focus Function Compatibility
Three-level follow focus control for Canon DSLRs and mirrorless cameras released after 2008, with original Canon autofocus lenses

Additional information



Operating Voltage Minimum: 9.8 V
Standard: 11.1 V
Maximum: 12.6 V
Operating Current Minimum: 110 mAh
Maximum: 6000 mAh
Output Voltage USB: 5 V
Camera Charging: 8 V
Output Current USB: 1 A
Camera Charging: 2 A
Battery Runtime Minimum: 12 h
Maximum: 18 h
Following Accuracy Static: ±0.01° to ±0.3°
Motion: ±0.05° to ±0.1°
Rotational Angle Range Tilt: -135° to +185°
Roll: 360°
Pan: 360°
Operating Temperature Minimum: 14°F (-10°C)
Standard: 77°F (25°C)
Maximum: 113°F (45°C)
Payload Capacity Minimum: 1.1 lb (500 g)
Maximum: 7.1 lb (3200 g)
Dimensions (WxDxH) 8.3 x 4.6 x 17.7″ (21.0 x 11.8 x 45.0 cm)
Weight 2.8 lb (1.25 kg)


There are no reviews yet.

Be the first to review “Zhiyun-Tech Crane-2 3-Axis Stabilizer with Follow Focus”

Your email address will not be published. Required fields are marked *

17 − one =